Home FLANGE MOUNT ATTENUATOR

FLANGE MOUNT ATTENUATOR

HIGH POWER 50 OHM,1-800 WALTS

GENERAL SPECIFICATIONS

  • Nominal Impedance: 50 Ω
  • Attenuation Values: 0dB to 30dB.
  • Resistive Elements: Proprietary Thick or Thin Film.
  • Substrate Material: Aluminium Nitride.(AlN=N) and Alumina (Al2O3 =A)
  • Cover: Alumina or High Temperature Epoxy.
  • Tab: Silver or Beryllium copper, Gold Plated Per MIL-G-45204.
  • Mounting Flange: Copper, Nickel plated per QQ-N-290.
  • Reliability: MIL-PRE-55342.
flange mount

Note 1: -dB=001 =1dB, 010=10.0dB 030 =30dB

Note 2: VSWR Max applies to full frequency range.

Note 3: Input power ratings are based on flange temperature of 100°C maximum.

Mechanical Tolerance: ±0.010 inches unless otherwise specified.

flange mount attenuator
general specifications

Contact Factory for other configurations and power rating

attenuator

PANF10

attenuator two

PANF20

attenuator three

PANF50

attenuator four

PANF100

NOTES:

  1. Standard values: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 20 dB
  2. Contact factory for non standard values as special order.
  3. Custom products are available at higher frequencies with optimized VSWR and attenuator accuracy over narrow frequency bandwidths.
  4. VSWR as measured in a 0.125in ground plane stripline circuit

Planar Microwave Technologies Ltd is a startup company based in the heart of the United Kingdom.

Stay In Touch

+44(0)7468566633

Unit 6, Robinson Industrial Estate
Shaftesbury Street
Derby, DE23 8NL, UK

© Copyright 2024 Planar Microwave Technologies LtdWeb Design By Toolkit Websites